Not exactly a Fiat

If you just registered, post a brief greeting in here.
Post Reply
FiatMorris

Not exactly a Fiat

Post by FiatMorris »

Hello,
This is my first post to the forum. I hope that my situation is not offensive to anyone here and if it is I apologize in advance. I do not own a Fiat but have always appreciated them from afar. I do own a 1955 Morris Minor Traveller which I am in the process of fitting a Fiat driveline into. This has been a popular swap in Europe for many years but I don’t think there are too many here in the US. I purchased the engine (1608), gearbox and rear axle out of a 1972 124 Spider. The owner of the Spider somehow wedged an American V8 into the car which left the original driveline available. At this time the Fiat rear end is installed in the Morris, the engine in sitting on the engine stand awaiting the last few bits to be installed and I am waiting for the trans to come back from the shop. As I stated earlier I hope this is not considered a sacrilege and hopefully some of you here will take pity on me and help with questions that will surely arise.
Thank you,
Steve
User avatar
Curly
Posts: 526
Joined: Tue Feb 12, 2008 1:09 am
Your car is a: 1968 AC Coupe and a 1976 CS1 Spider
Location: Gippsland - Victoria, Australia

Re: Not exactly a Fiat

Post by Curly »

Welcome Steve,
That modification you're undertaking was also quite common Down Under, although most people just used the engine and gearbox, then suffered repeated axle breakages :roll: until installing a stronger rear end. Datsun (Nissan) engines and transmissions were another popular choice.
Don't forget to post some pictures when you have the pieces in place.
Tobi

Re: Not exactly a Fiat

Post by Tobi »

Fix it again Tommy :lol:
I think it's a bigger sacrilege to put a V8 in a Fiat.
baltobernie
Patron 2020
Patron 2020
Posts: 3466
Joined: Sun Nov 25, 2007 6:00 pm
Your car is a: 1973 Spider [sold]
Location: Baltimore, MD

Re: Not exactly a Fiat

Post by baltobernie »

Wow, when those Marelli volts meet the Lucas fuse block, look out :shock:
User avatar
courtenay
Patron 2020
Patron 2020
Posts: 1321
Joined: Mon Nov 30, 2009 11:41 pm
Your car is a: 1980 Spider 2000
Location: Courtenay, BC, Canada

Re: Not exactly a Fiat

Post by courtenay »

What are you going to call the end result? A Fimo, or Moriat??
Bruce Shearer
'80 Spider Fi
'10 Volvo XC70
'06 GMC 1 Ton PU
'72 Spider a long, long time ago
FiatMorris

Re: Not exactly a Fiat

Post by FiatMorris »

Thanks for the welcome.

I know what I will call it...Faster!

I decided to go with the Fiat rear-end as it was designed for the engine and trans, plus I got disc braked out of the deal. It wasn’t too hard to fit as the width is about the same. I had to carve off all of the trailing arm mounts and coil spring perches and weld on perches to fit the Morris leaf springs. Although I still have to sort out the brakes.
I will post picks when I figure out how.

Steve
mdrburchette
Posts: 5754
Joined: Wed Jan 25, 2006 5:49 am
Your car is a: 1972 Fiat 124 Sport
Location: Winston-Salem, NC

Re: Not exactly a Fiat

Post by mdrburchette »

Interesting mods. If you've read many posts on this forum, you'll realize most of us aren't to concerned about originality. Our main goal is to keep our cars alive. Welcome to the forum. I think you'll be pleased with your new 1608 Minor!
1972 124 Spider (Don)
1971 124 Spider (Juan)
1986 Bertone X19 (Blue)
1978 124 Spider Lemons racer
1974 X19 SCCA racer (Paul)
2012 500 Prima Edizione #19 (Mini Rossa)
Ever changing count of parts cars....It's a disease!
Post Reply