Hi guys need some help,
All of the sudden my right high beam stop working along with my left front blinker. I remember a mechanic fixing that when I asked him to take a look at my dash as the gas gauge, temp gauge, tachometer and clock among other things.
Has anyone experienced something like that? I don't have blown fuses...
2nd time this happens
- LuisMateoSpider
- Posts: 57
- Joined: Wed Jul 10, 2013 2:29 am
- Your car is a: 124CS1 - Spider 1978
- LuisMateoSpider
- Posts: 57
- Joined: Wed Jul 10, 2013 2:29 am
- Your car is a: 124CS1 - Spider 1978
Re: 2nd time this happens
I found it!
It was a loose terminal in the wheel well, and the head light, no clue it started working on its own... Originally I thought it was something to do with a short circuit as the marker light did work it was the signal, so the only cable loose was the signal one.
It was a loose terminal in the wheel well, and the head light, no clue it started working on its own... Originally I thought it was something to do with a short circuit as the marker light did work it was the signal, so the only cable loose was the signal one.
-
- Posts: 248
- Joined: Sun Oct 23, 2011 2:12 pm
- Your car is a: 1979 Fiat 2000
- Location: Toronto, On
Re: 2nd time this happens
It's probably a loose connection somewhere. If I go over a certain set of bumps they shut off, If I go over another set, they go back on. I'm not kidding. I've been looking for my headlamps for a couple of months now.
1979 Fiat 2000 "Luigi"
- LuisMateoSpider
- Posts: 57
- Joined: Wed Jul 10, 2013 2:29 am
- Your car is a: 124CS1 - Spider 1978
Re: 2nd time this happens
So far so good,
I cleaned the terminals and re-connected again, and good! I have a similar problem with the radio (the previous owner installed a modern one) and it tends to stop working now and then...
I cleaned the terminals and re-connected again, and good! I have a similar problem with the radio (the previous owner installed a modern one) and it tends to stop working now and then...