Oil Pressure gauge on the fritz

Gotta love that wiring . . .
Post Reply
FiatFan15

Oil Pressure gauge on the fritz

Post by FiatFan15 »

I recently purchased a 1976 Fiat Spider, 1800 cc engine. The previous owner told me that the oil pressure gauge was acting funny. The gauge reads around the 6 O'clock position or lower most of the time. However, sometimes it goes right to zero and stays there for a bit, but the light in the instrument does not come on. Should I be concerned that my oil pump is failing, or is this an electrical issue? Any thoughts would be appreciated! Thanks!

~George
vandor
Posts: 3996
Joined: Sat May 23, 2009 1:23 pm
Your car is a: 1971 124 Spider
Location: Texas, USA

Re: Oil Pressure gauge on the fritz

Post by vandor »

You can only be sure by temporarily hooking up a mechanical gauge, but likely the electrical sending unit has failed.
Csaba
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
fiat218
Posts: 5745
Joined: Fri May 16, 2008 5:06 pm
Your car is a: 1969 124 AS spider

Re: Oil Pressure gauge on the fritz

Post by fiat218 »

Do they even register ,seems mine are running low pressure when the engine is warm
Jim
East Grand Forks MN
1970 Fiat Spider BS1 ( FOR SALE
1969 124 AS Spider
2017 Abrath
2018 Alfa Romeo 4c Spider
Post Reply