Edit... Resto mod FIRST DRIVE
Re: Edit... Resto mod coming together
Yes I am Mark,
While the dash face is fixed, the top is removable. So access is relatively good.
While the dash face is fixed, the top is removable. So access is relatively good.
- toplessexpat
- Posts: 1183
- Joined: Fri Aug 31, 2012 2:29 am
- Your car is a: 1976 Spider 1800
- Location: Houston, TX
Re: Edit... Resto mod coming together
You'll feel better about it for sure.....SoFlaFiat wrote:Ok Andy! Done!
I decided if the amp in the dash didn't work it would be a miserable job later so I took it all out
and routed constant power, switched power and front speaker wires to the rear package shelf. Better in the end, I'm sure!
.... mine's probably going under the rear shelf, possibly under a small hatch if I think about it right, or perhaps behind the back between the speakers. 12v USB quad port behind the front console (which I'm replacing with a coupe one, and used the air vents for a couple of extra gauges as a man can't have too many... A/F mixture gauge wired to a dash mounted toggle on/off so that I'm not driven insane by the A/F mix with my carb'd car!)
-
- Posts: 3996
- Joined: Sat May 23, 2009 1:23 pm
- Your car is a: 1971 124 Spider
- Location: Texas, USA
Re: Edit... Resto mod coming together
> so that I'm not driven insane by the A/F mix with my carb'd car
Too late
Too late
Csaba
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
Re: Edit... Resto mod coming together
Im betting he's got you there Andy!vandor wrote:> so that I'm not driven insane by the A/F mix with my carb'd car
Too late
Maybe you should go for something completely redundant like the "excitement meter gauge"
Get one of those and you can leave the switch on all the time!!
- toplessexpat
- Posts: 1183
- Joined: Fri Aug 31, 2012 2:29 am
- Your car is a: 1976 Spider 1800
- Location: Houston, TX
Re: Edit... Resto mod coming together
At least I have nice translations on my dials.....
Ah, Csaba, no need to comment there......
Ah, Csaba, no need to comment there......
Re: Edit... Resto mod coming together
So between the wiring diagrams, and instructions, from Painless, Advanced Keys, MSD, Brad Artigue and BaltoBernie (thanks Bernie for the write up!!) (and thanks again Brad, for all the info you have made available on wiring Fiats!)
I THINK... I have everything hooked up right...
With any luck I will be able to post some video of "start up day" before the end of the weekend.
Wish me luck, cross your fingers!!!
I THINK... I have everything hooked up right...
With any luck I will be able to post some video of "start up day" before the end of the weekend.
Wish me luck, cross your fingers!!!
-
- Posts: 3996
- Joined: Sat May 23, 2009 1:23 pm
- Your car is a: 1971 124 Spider
- Location: Texas, USA
Re: Edit... Resto mod coming together
Keep a fire extinguisher handy
Csaba
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
Re: Edit... Resto mod coming together
Is that your idea of wishing luck? you sarcastic Hungarian!!
If I had never lived in Maine with an Austrian mother, I wouldn't understand such dry humor!!
If I had never lived in Maine with an Austrian mother, I wouldn't understand such dry humor!!
- toplessexpat
- Posts: 1183
- Joined: Fri Aug 31, 2012 2:29 am
- Your car is a: 1976 Spider 1800
- Location: Houston, TX
Re: Edit... Resto mod coming together
Maybe a pair of extinguishers....
Re: Edit... Resto mod coming together
Obviously, my "start up" video will begin with the filming of BOTH my fire extinguishers!!toplessexpat wrote:Maybe a pair of extinguishers....
and hopefully end with them both in the same place they are now!!!
Go ahead Andy, make another comment! I'm looking for my bitch slap button already!!
- toplessexpat
- Posts: 1183
- Joined: Fri Aug 31, 2012 2:29 am
- Your car is a: 1976 Spider 1800
- Location: Houston, TX
Re: Edit... Resto mod coming together
How about a hard wired fire suppression system.... Just in case...
- 81SPIDERMATT
- Posts: 1239
- Joined: Mon Oct 11, 2010 5:10 pm
- Your car is a: 1981 spider 2000
- Location: FORT COLLINS, CO
Re: Edit... Resto mod coming together
getting ready to do initial start on a 3 year scout II project .... it is very exciting and nerve racking at the same time .... I have crawled under over and in every corner of that truck three times at least .... I wake up at night thinking of something ..get dressed go out with a flashlight and look at the reason for my nightmare only to find everything is fineSoFlaFiat wrote: I THINK... I have everything hooked up right...
With any luck I will be able to post some video of "start up day" before the end of the weekend.
Wish me luck, cross your fingers!!!
hoping that if something is wrong it will only squirt or drip some type of fluid and be fixed by tightening a bolt or something ... praying for no sparks or smoke or big sledgehammer noises
fingers crossed for you big time
Re: Edit... Resto mod coming together
Thanks Matt!! I'll unfoe you for that!!81SPIDERMATT wrote:
fingers crossed for you big time
Is that even a word?
And good luck, fingers crossed, for Scout start up day!!
Re: Edit... Resto mod coming together
Oh so close...
Exhaust back off with the last bits welded on
I hooked up the starter and alternator, installed the clutch cable, filled the differential, installed the exhaust and started with fluids. I filled the oil cooler first
Then the filter, and then the rest.
Still lots to do tomorrow but maybe, just maybe I'll hear it run.
Exhaust back off with the last bits welded on
I hooked up the starter and alternator, installed the clutch cable, filled the differential, installed the exhaust and started with fluids. I filled the oil cooler first
Then the filter, and then the rest.
Still lots to do tomorrow but maybe, just maybe I'll hear it run.