One Piece Wood Dash Insert

So Cal Mark · Post by **So Cal Mark** » Tue Mar 10, 2015 11:02 pm

We're in the midst of a resto-mod on an 81 and the customer requested a one-piece wood dash. We're using all VDO gauges with an indicator cluster from Demon Tweaks. We'll be offering some versions of this dash in the near future. It can be made to use stock Veglia gauges

scampbel98 · Post by **scampbel98** » Thu Sep 10, 2015 12:05 am

the idiot lights down low are a nice touch....

So Cal Mark · Post by **So Cal Mark** » Thu Sep 10, 2015 12:17 am

not just idiot lights, the headlamp warning and turn signal indicators are included in that module

scampbel98 · Post by **scampbel98** » Thu Sep 10, 2015 12:45 am

i'm headed down the same path... keeping stock gauges

120 deep speedo and tach
vegilia battery voltmeter
2nd temp for oil and water
oil pressure
clock

I've abandoned the dimmer (LEDs) and am going to glove box mount the wiper speed.
An extra fan override and fog lamps may go in.
I need to plane it down yet as it's something like 3/8" thick right now

I'm curious what are you using for cutting the wood/material? hole saws are not that accurate

So Cal Mark · Post by **So Cal Mark** » Thu Sep 10, 2015 2:17 am

router

Yadkin · Post by **Yadkin** » Wed Jun 08, 2016 11:16 am

I'm interested in one of these. What does it look like installed along with the glove box door?

v6spider · Post by **v6spider** » Wed Jun 08, 2016 4:54 pm

So Cal Mark wrote:We're in the midst of a resto-mod on an 81 and the customer requested a one-piece wood dash. We're using all VDO gauges with an indicator cluster from Demon Tweaks. We'll be offering some versions of this dash in the near future. It can be made to use stock Veglia gauges

Where are the switches for wiper delay and hazard?

Rob

So Cal Mark · Post by **So Cal Mark** » Wed Jun 08, 2016 10:15 pm

hazard switch is in the middle console, wiper delay was eliminated

scampbel98 · Post by **scampbel98** » Tue Jun 28, 2016 8:24 pm

nice looking dash. cool use of indicators down low. Did you have to do anything special for the alternator exciter circuit?

So Cal Mark · Post by **So Cal Mark** » Tue Jun 28, 2016 11:40 pm

nothing special for the alternator, just wired the excite circuit through the warning light

georgeramos · Post by **georgeramos** » Sun Jul 03, 2016 12:04 am

Nice work Mark, really love to see it with the glove box door installed etc.

One Piece Wood Dash Insert

One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert

Re: One Piece Wood Dash Insert