spider2081 wrote:Between the headlight on/off switch and the fuse panel is the headlight hi/lo switch on the steering column. The original hi/lo switch was a 2 position either hi or lo beam. Some aftermarket replacement switches have an off position. Full up with the lever is off middle is lo and down is hi beam. Also there is a headlight flash switch that is activated by pulling the lever toward you. It is common for the column switch to fail over time especially if higher wattage headlight bulbs have been installed.
That might be it. I took out the switch and opened it. When putting it back together, I put it in wrong and had high beams but nothing else. I then took the switch apart and had no head lights but everything else. I think it has to be the switch so I will just order a new one. My homework is to learn more about electrical.