Got a crunchy sound that I think is coming from the rear pax side. I've removed the axles and have ordered new rear bearings. No one in town had them. I'm going to get the pressed on and off at a shop. There's a couple of super thin o-ring seals or gaskets where the bearing meets the caliper carrier.
Where can I find or source those. Vicks, Mr. Fiat.. no one has them...
thanks
Rear wheel bearings
-
- Posts: 304
- Joined: Mon Oct 04, 2010 7:45 pm
- Your car is a: 1980 Fiat 124 carb
- Contact:
- Nanonevol
- Patron 2018
- Posts: 828
- Joined: Thu Nov 13, 2014 9:17 am
- Your car is a: 1977 Fiat 124 Spider
- Location: Medway, Massachusetts
Re: Rear wheel bearings
Is this it?
https://autoricambi.us/products/rear-axle-shaft-bearing
Oh, sorry, you need related parts. Maybe A/R has them?
https://autoricambi.us/products/rear-axle-shaft-bearing
Oh, sorry, you need related parts. Maybe A/R has them?
1977 Fiat Spider
1985 Jaguar XJ6
1967 Triumph Bonneville (hard-tail chopper)
1966 BSA Lightning
1985 Jaguar XJ6
1967 Triumph Bonneville (hard-tail chopper)
1966 BSA Lightning
-
- Posts: 304
- Joined: Mon Oct 04, 2010 7:45 pm
- Your car is a: 1980 Fiat 124 carb
- Contact:
Re: Rear wheel bearings
sorry. to be clear, I found the bearings at Vicks but no one has the o rings
-
- Posts: 366
- Joined: Thu Sep 11, 2014 10:28 pm
- Your car is a: 1979 Spider 2000
Re: Rear wheel bearings
I just replaced my rear axle seals and the O-rings two weeks ago, AR had both items in stock.
Use some heavy grease to keep the O-ring in place on the bearing and keep it from rolling.
https://autoricambi.us/collections/driv ... oring-seal
https://autoricambi.us/collections/driv ... e-oil-seal
Use some heavy grease to keep the O-ring in place on the bearing and keep it from rolling.
https://autoricambi.us/collections/driv ... oring-seal
https://autoricambi.us/collections/driv ... e-oil-seal
-
- Posts: 304
- Joined: Mon Oct 04, 2010 7:45 pm
- Your car is a: 1980 Fiat 124 carb
- Contact:
Re: Rear wheel bearings
thanks KMoses.. I must have missed those somehow. thanks for the pointer...