cam housing sequence

[tima01864]

Is a torque sequence for the cam housings, can not find in the shop manual 1983 2000

[JohnMc]

I have never seen or used a sequence for the cam housings - but I do tighten them snug and then to full torque. But i would be interested if others have a sequence.

Now most of my exhaust side I have had to heli-coil and it always seems to be one of the last bolts that need torquing.

[Odoyle]

Cam towers are torqued to 22 N·m (14 FT. LB.)

[tima01864]

I followed the sequence like the Cylinder Head @ 14ft lbs

[RRoller123]

That should do it.