Brake Line Fitting Size?

[NorthernOtter]

Went to go and replace the rear brake hoses while I was replacing the pads as well. Of course I ended up stripping the brake line fittings so I need to replace the lines as well as the hoses.

Went to two auto stores and they didn't have the proper fittings. Want to make sure I have the right specs in mind in case I have to order.

Are the rear brake line fittings M10x1.25? And the line is 3/8 with a bubble flare?

Cheers!

[NorthernOtter]

So I managed to find the fittings locally at a Bumper 2 Bumper auto parts store. Canadian Tire, Lordco and NAPA were no luck. For those who may be looking in the future, the fittings are:

M10x1.25, 3/16" line with a bubble flare.

[RRoller123]

That bubble flare is a pita, but it can be made. I used a cheap HF brake flaring kit and got the job done, but it took some trial and error on spare tubing.