Speedo cable will not release from drive

Keep it on topic, it will make it easier to find what you need.
Post Reply
Spider124guy
Posts: 3
Joined: Wed Nov 18, 2020 11:29 am
Your car is a: 1984 Pininfarina Azzurra

Speedo cable will not release from drive

Post by Spider124guy »

Doing an R&R on my manual transmission. 1984 model. Loosened the knurled ferrel from the drive but the cable refuses to come out. Anyone experienced this before? There was a lot of time spent trying to pull the cable out with some force but it is still stuck. What gives?? Any and all advice appreciated before I resort to wire cutters. Thanks!
SteinOnkel
Posts: 1000
Joined: Tue Feb 19, 2019 9:31 pm
Your car is a: 1978 124 Spider 1800

Re: Speedo cable will not release from drive

Post by SteinOnkel »

Try rotating the rear wheels up in the air with a gear engaged and pulling on the cable at the same time.

Might need to grow some ten foot long arms for this. Or have someone help you, whichever is easier.
Post Reply