1985 Pininfarina Spider AC system
Posted: Fri Aug 30, 2013 3:22 am
I am restoring my 1985 Pininfarina spider. It has an AC. I purchased the wiring diagrams for the car and my car seems to match what I see on the wiring diagrams. However the FI maintenance manual suggests that the AC cars should have a AC Idle step up electrovalve.
I can find the part at Midwest-Bayless, however I don't know where or how it would be mounted since my car currently doesn't have one. Do you know about anyone that has such a car and perhaps they could send me a photograph of how their unit is mounted? Also there is a electrical line that comes from a relay on the side wall of the engine bay that is actuated via a pressure switch on the AC fluid line that will turn on the radiator fan. I could use a picture of how that wire was routed to the other side of the car (where was the wire held down with P clamps, etc.)
Thank you very much if you are able to point me in the right direction.
Scott
I can find the part at Midwest-Bayless, however I don't know where or how it would be mounted since my car currently doesn't have one. Do you know about anyone that has such a car and perhaps they could send me a photograph of how their unit is mounted? Also there is a electrical line that comes from a relay on the side wall of the engine bay that is actuated via a pressure switch on the AC fluid line that will turn on the radiator fan. I could use a picture of how that wire was routed to the other side of the car (where was the wire held down with P clamps, etc.)
Thank you very much if you are able to point me in the right direction.
Scott