Page 1 of 1

Rocker panel color

Posted: Sun Apr 27, 2014 8:32 am
by rjkoop
I had to replace one of the rocker panels on my tan colored '81. It might be difficult to match the paint and was thinking about painting them black. I saw this picture which looked really nice.

Image

Not sure the black would work with my car though.

Image

Or maybe they are down so low it would be fine. Anyone have any advice or pictures of their black rockers?

Re: Rocker panel color

Posted: Sun Apr 27, 2014 9:24 am
by RRoller123
I think the black would make the car look like it was sitting higher?

Re: Rocker panel color

Posted: Sun Apr 27, 2014 9:34 am
by Holshot
I have to agree... It will make the car look higher not to mention I personally don't think it will look good on that color. I think you're better off trying to match it to the original color as best as possible. If you take it to a good body they have those scanning computers that will scan the original paint and mix up the proper color and will make it match fairly well.

Re: Rocker panel color

Posted: Sun Apr 27, 2014 10:08 am
by spider2081
The rocker is separated from the body by a chrome strip. So I don't think a close color would be noticed. If painting both rockers you could make them slightly darker than original color.
Some Spiders had a polished aluminum cap on the rockers. Many like that look also. So a bright silver epoxy paint might be aplealing

Re: Rocker panel color

Posted: Sun Apr 27, 2014 12:29 pm
by azruss
I agree with matching the current paint. have the color matched from the bottom edge of the door or the fenders. That will give you the best blend at an adjacent panel.

Re: Rocker panel color

Posted: Sun Apr 27, 2014 2:32 pm
by rjkoop
K. Consensus is to match the color. Thanks for the advice everyone.