indicator failure 1976 1800

Antileon · Post by **Antileon** » Sat Jun 13, 2015 4:24 pm

My turn signals work but the indicator in the dashboard just gives a single fluttering flash when signals are activated,. its the same for both sides,. any suggestions of where to locate the problem. ?
Thanks for any help

So Cal Mark · Post by **So Cal Mark** » Sat Jun 13, 2015 7:09 pm

fix the voltage drop

Antileon · Post by **Antileon** » Sun Jun 14, 2015 3:15 am

So Cal Mark wrote:fix the voltage drop

You mean poor connections ?

azruss · Post by **azruss** » Sun Jun 14, 2015 2:08 pm

make sure your turn signal bulbs are good. clean the bulb sockets, and check their grounds. clean the connections to the bulbs, specifically the grounds.

Antileon · Post by **Antileon** » Sun Jun 14, 2015 2:51 pm

azruss wrote:make sure your turn signal bulbs are good. clean the bulb sockets, and check their grounds. clean the connections to the bulbs, specifically the grounds.

The signals works fine, its only the indicator in the dashboard that fails

seabeelt · Post by **seabeelt** » Sun Jun 14, 2015 5:10 pm

Check the ground for the instrument panel

indicator failure 1976 1800

indicator failure 1976 1800

Re: indicator failure 1976 1800

Re: indicator failure 1976 1800

Re: indicator failure 1976 1800

Re: indicator failure 1976 1800

Re: indicator failure 1976 1800