Megasquirt Tuning

[unplugged]

After many years and a very slow rebuild my engine finally came alive today. It was rebuilt with Megasquirt and EDIS.

While it starts and idles (barely) it is really rough and I am now starting the tuning process. For those who have gone down this road before can you offer suggestions on some of the ignition and fuel settings.

I used higher flow injectors (BOSCH 280 150 934) to go with the head modifications.

Thanks

[racydave]

Ive got a good map for the ignition, mines not fuel injected. You can use it as a base, and modify it.The set-up is for a vaccume sensor, not TPS. I posted it on the mega-jolt site recently. AS for the Fuel injection, you might try on Mira. There are a couple people there that might be helpfull.

[unplugged]

Thank you.

Anything you can send me to get me started would be appreciated.

dprice at plugnpay.com